LEGRAND CS102 - Page 39

CS102 SNMP Card
User Manual
39
SNMP
This page lets the administrator to configure the SNMP access to the CS102.
SNMP v1/v2c
Item
Description
Read Community
The string used to read the values of the SNMP protocol. Default: “public”
Write Community
The string used to read and write the values of the SNMP protocol.
Default: “private”
SNMP v3 USM Table
Item
Description
User Name
This field allows you to set the username for accessing the CS102 via
SNMP v3.
Auth-Protocol Password
This field allows to set the authentication password of the
associated user.
Auth Protocol
This field allows to set the authentication protocol: “HMAC-MD5”
or “HMAC-SHA”.
Priv-Protocol Password
This field allows to set the privacy password of the associated user.
Priv-Protocol
This field allows to set the privacy protocol: “DES” or “AES”.
Security Level
This field allows to set the access type for the user.
The available options are:
◼ noAuthNoPriv: no authentication and no privacy passwords
◼ authNoPriv: authentication password but no privacy password
◼ authPriv: no authentication password but with privacy password