Leibinger JET3 up - Page 102

Service Manual JET3
102 Rev. 1.0
Clean the Print Head only at the correct area, right of red dotted line.
Attention: It is forbidden to clean on the left side of the dotted line. Don’t use
any kind of solvent to clean the left side of the dotted line.
Especially in the area of the oscillator and plug connector it is not allowed to wash with
solvent. When solvent enter the oscillator, it could destroy this part or some malfunctions
could occur.
Cleaning Area
=> Solvent can be used!!
No cleaning necessary
=> No Solvent usage!!