Leibinger JET3 up - Exchange Gutter Tube (SK6)

Service Manual JET3
Rev. 1.0 123
7) Exchange gutter tube
1. Switch on the JET3up and wait until initializing is finished.
2. Select the softkey <Hydraulik settings> (1) and switch to tab <Printhead> (2).
3. Push the button <Ink off> (3) and afterwards open the nozzle by pushing the button
<Jet Adjust> (4).
1 – Softkey <Hydraulik settings>
2 – Menu <Printhead>
3 – Button <Ink off>
4 – Button <Jet Adjust>
1
2
3
4
