Leibinger JET3 up - Exchange Suction Tube on Print Head (SK6)

Service Manual JET3
Rev. 1.0 131
8) Exchange suction tube on print head
1. Start up the JET3up via the touch-display and wait until the initialization and the bleeding
is finished.
2. Switch the softkey <Hydraulik settings> (1), open the menu <Printhead> (2) and
deactivate the <Ink-Flow-Sensor> (3)
1 – Softkey <Hydraulik settings>
2 – Menu <Printhead>
3 – Button <Ink flow sensor>

1
3
2