Leibinger JET3 up - Exchange Oscillator (SK4)

Service Manual JET3
Rev. 1.0 75
5) Exchange the oscillator
1. Start up the JET3up via the touch-display and wait until the initialization and the
bleeding is finished.
2. Touch the softkey <Hydraulic settings> (1), open the <Printhead> (2) menu and
deactivate the <Ink-flow-sensor> (3)
1 – Softkey <Hydraulic settings>
2 – Menu <Printhead>
3 – Function <Ink-Flow-Sensor>

3
1
2