Leibinger JET3 up - Exchange Gutter Tube (SK4)

Service Manual JET3
Rev. 1.0 83
6) Exchange gutter tube
1. Switch on the JET3up and wait until initializing is finished.
2. Select the softkey <Hydraulic settings> (1) and switch to tab <Printhead> (2).
3. Push the button <Ink off> (1) and afterwards open the nozzle by pushing
the button <Jet Adjust> (2).
4. Open the nozzle completely with the <arrow> (1) button.

2
1
1
1
2