Leibinger JET3 up - Exchange Electrode Block (SK6)

Service Manual JET3
Rev. 1.0 137
9) Exchange the electrode block
1. Switch off the JET3up.
2. Remove the mains plug.
Dangerous electrical voltage!
Contact causes serious damage through an electric shock! Disconnect the
device from the voltage supply prior to open. Remove the main plug!
Necessary tools:
6-fold magnifying Glasss, Allen keys (SW 1,5 + 2,0 mm) and Torque Allen
key with blade for torx (T6 + T8)
You will find these keys in our Spare Part and Accessories Catalog!
