Leibinger JET3 up - Cleaning Nozzle with Special Cleaner (SK4)

Service Manual JET3
64 Rev. 1.0
3) Cleaning of nozzle with special cleaner 77001-00020
1. Switch on the JET3up and wait till the “bleeding cycle” of the system is finished.
2. Click on the softkey <Hydraulic settings> (1) to change to the menu <Printhead>
(2). Press the button <Ink off> (3).
1 – Softkey <Hydraulic settings>
2 – Menu <Printhead>
3 – Button <Ink-off>

1
2
3