Leibinger JET3 up - Page 157

Service Manual JET3
Rev. 1.0 157
25. Test the reliability performance of the valves in menü <Special Functions/Tools> (1).
26. Switch on the button <Control> (1).
27. Test the reliability performance of the valves, again.
28. Switch off the JET3up and switch on again (wait for the bleed cycle).
29. Check, if the JET3up is working well.
- <Visco Pump>
- <Bleed Valve>
- <Mixer Valve>
- <Ink Valve>
- <Air release>
Push the buttons:
If you hear a “click”,
the valve is working!
1
1