Leibinger JET3 up - Page 170

Service Manual JET3
170 Rev. 1.0
8. The main power supply type for correctness examine:
JET3up Mainpower Supply
Part No: 55-006927 S
9. The installation for the new power supply takes place in the reverse order.
10. A functional test carry out:
The net plug in the outlet put. The JET3up systems begins the boot process and
then goes automatically in the Standby mode.
Now the LEDs V2-189 and V3-681 must shine green on the main platinum.
Attention
After the installation of a new power supply you must conduct an
isolation measurement!!!