Leica mojo3D, Auto-Steer 109
5.2.2 Sensitivity
Setting the sensi-
tivity
The sensitivity will control the rate that the vehicle turns and how sensitive it is when
it is on the line. Sensitivity should be the only parameter that you need to adjust to
adapt the control performance to the current working conditions after the tuning
refinement is done.
2. Adjust the slider to vary the sensitivity, by using the and .
Explanation • The sensitivity can be set between 50% and 150%. The standard setting is 100%.
• In general, higher sensitivity is for slower travelling speed, lower sensitivity for
faster speed.
1. On the tuning screen, tap the sensitivity button.
• Different sensitivity settings and their
approach to the working line:
To Next Page
Loading...
Need help?
General
