Leica mojo3D, Vehicles and Implements 181
9.2 Load a Vehicle or Implement Configuration
General Informa-
tion
If there are vehicle or implement configurations saved on the mojo3D, then they can
be reloaded so the user does not have to re-enter the details of the configuration.
It is up to the operator to confirm that the correct configuration is loaded
and that the settings are correct. The system cannot detect if incorrect
settings have been loaded.
Loading a vehicle
or implement
configuration,
step-by-step
To load a vehicle or implement configuration, carry out the following steps:
1. On the main navigation screen, tap the settings button.
To Next Page
Loading...
