Leica mojo 3D - Changing a Field Boundary Name

Leica mojo3D, Field Boundary 161
8.3 Changing a Field Boundary Name
Changing the field
boundary name,
step-by-step
To change the name of a stored boundary, carry out the following steps:
1. On the main navigation screen, tap the mapping button.
2. On the flyout menu, tap the boundary management button.
3. Tap or to scroll through the list of boundaries. Tap the boundary name
to select it.
4. Tap the edit button.
5. Use the on-screen keyboard to change the name of the boundary, and tap .