Leica mojo3D, System Installation 25
2.3 Antenna Installation
Preparations 1. Read all instructions before assembly and installation.
2. Clean the cab roof to prepare for the installation of the antennas. Approved
cleaning products are denatured alcohol and Windex
®
glass cleaner.
mojo3D GPS
antenna
The mojo3D GPS antenna should be mounted on the vehicle roof:
• on the centre line of the implement, which may not necessarily be the centre of
the vehicles roof
• as far forward as possible on the flat level part of the roof
• not obstructed by exhausts, flashing lights or any other objects
1. Use the supplied cleaning
wipes to clean the installa-
tion area.
2. Make sure that the installa-
tion area is clean and dry.
3. Mount the GPS antenna on
the roof of the vehicle. Use
the adhesive tape
provided.
To Next Page
Loading...
Need help?
General
