142
Leica mojo3D, Treatments
6.7 Importing Treatment Data
Importing treat-
ment data, step-
by-step
Refer to "Appendix B Formatting USB Flash Drives" for important informa-
tion about using USB drives with the mojo3D products.
Do not turn off the mojo3D, or remove the USB Flash Drive, while the treat-
ment data import is under way.
To import treatment data, carry out the following steps:
1. The USB interface is on the lower left front of the
mojo3D display. Lift the rubber cover and insert a
compatible USB Flash Drive into the USB slot.
2. On the main navigation screen, tap the settings button.
To Next Page
Loading...
