Leica mojo 3D - Attached Device Selection

Leica mojo3D, Running the mojo3D for the First Time 63
3.13 Attached Device Selection
General informa-
tion
Attached device selection includes:
• Selection of attached device:
• None (mojo3D is used as a standalone device)
• Electric Steer Kit
• Leica mojoRTK
• Leica mojoXact/mojoXact Plus
• Configuration of attached device
Attached device
selection, step-by-
step
To select and change one of these items, carry out the following steps:
1. On the main navigation screen, tap the Settings button.
2. On the flyout menu, tap the Attached device selection button.
3. On the attached device selection screen, tap the button that
describes your setup, for example the Leica mojoXact Plus.