Leica mojo 3D - Importing Field Boundary Data

Leica mojo3D, Field Boundary 169
8.6 Importing Field Boundary Data
General informa-
tion
Field boundary data in the following formats can be imported into a mojo3D:
• mojo3D files.
• Google Earth kml files.
• Shapefile .shp, .dbf, .prj and .shx files.

Refer to "Appendix B Formatting USB Flash Drives" for important informa-
tion about using USB drives with the mojo3D products.

Do not turn off the mojo3D, or remove the USB Flash Drive, while the data
import is under way.
You can import mojo3D files, Google Earth files or Shapefile files.