Leica mojo 3D User Manual

170
Leica mojo3D, Field Boundary
Importing field
boundary data
from mojo3D files,
step-by-step
To import field boundary data from mojo3D files, carry out the following steps:
1. The USB interface is on the lower left front of the
mojo3D display. Lift the rubber cover and insert a
compatible USB Flash Drive into the USB slot.
2. On the main navigation screen, tap the settings button.
3. On the flyout menu, tap the transfer data button.
4. Tap the import from USB button and tap to continue.
The Select the data to transfer screen displays.
mojo3D_010

Leica mojo 3D Specifications

General

Brand	Leica
Model	mojo 3D
Category	GPS
Language	English