Leica mojo3D, Care and Transport 247
13.3 Cleaning and Drying
Product and acces-
sories
Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the cloth with
water or pure alcohol. Do not use other liquids; these may attack the polymer compo-
nents.
Damp products Dry the product, the transport container, the foam inserts and the accessories at a
temperature not greater than 40°C / 104°F and clean them. Do not repack until
everything is completely dry. Always close the transport container when using in the
field.
Cables and plugs Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the connecting
cables.
To Next Page
Loading...
