Leica mojo 3D - Setting Guidance Types; AB Parallel Guidance

68
Leica mojo3D, Setting Guidance Types
4 Setting Guidance Types
Waypoints Waypoints are used to define a line in the field to which all working lines will be
parallel. Waypoints must be set before auto-steer can be used.
4.1 AB Parallel Guidance
General informa-
tion
Setting waypoints,
step-by-step
To set AB waypoints, carry out the following steps:
In AB Parallel guidance, working lines are parallel,
and are set by defining an initial waypoint and an
endpoint.

Before you can set waypoints, the
system must have a good position fix.
1. On the main navigation screen, tap the guidance button.