182
Leica mojo3D, Vehicles and Implements
2. On the flyout menu, tap the vehicle setup management button.
The Vehicle Setup Management screen, shown below, displays with
the currently saved configurations listed on the left.
3. Tap the configuration to be loaded to select it.
The right side of the screen displays some information about the selected config-
uration so you can confirm you have selected the correct configuration.
4. To continue with the loading of the selected configuration tap the button.
The configuration is loaded and you are returned to the main navigation screen.
OR
To cancel the loading operation, tap the button.
No changes are made to the configuration and you are returned to the main navi-
gation screen.
To Next Page
Loading...
Need help?
General
