46
Leica mojo3D, Running the mojo3D for the First Time
Correction source
configuration,
step-by step
1. On the Correction Source screen, select the correction source to use for your
system.
2. Tap to continue.
•If Network DGPS is selected, further configuration is required and this is
described in "10.1 Network DGPS". Once the configuration is complete, the
NMEA Configuration screen displays.
•If GL1DE
TM
Only is selected, no extra configuration is required, so the NMEA
Configuration screen displays when the button is tapped.
NMEA configura-
tion
If NMEA output is not required tap to complete the initial setup.
If NMEA output is required from the mojo3D, follow the detailed informa-
tion in "11 NMEA Output".
To Next Page
Loading...
