Leica mojo3D, Running the mojo3D for the First Time 57
Viewing errors,
step-by-step
To view the list of recent errors, carry out the following steps:
If there is more than one error active, brief descriptions of the errors
cycle at 2 second intervals at the bottom of the main navigation
screen.
Critical errors are shown as blocking messages, where the operator
must acknowledge and address the error before normal operation can
continue.
Details of errors can be displayed by following the directions below.
1. On the main navigation screen, tap the Status button.
2. For an overview of status information, like number of satellites,
cell modem signal strength, or steering kit status, tap the Over-
view button.
3. For a list of local errors, tap the local errors button.
4. Tap on an error in the list to display more information.
To Next Page
Loading...
