Leica mojo 3D User Manual

86
Leica mojo3D, Setting Guidance Types
Exporting waylines,
step-by-step
To export all waylines stored in the mojo3D in a mojo3D file format, carry out the
following steps:
1. The USB interface is on the lower left front of the
mojo3D display. Lift the rubber cover and insert a
compatible USB Flash Drive into the USB slot.
2. On the main navigation screen, tap the settings button.
3. On the flyout menu, tap the transfer data button.
4. Tap the export to USB button and tap to continue.
mojo3D_010

Leica mojo 3D Specifications

General

Brand	Leica
Model	mojo 3D
Category	GPS
Language	English