Lenovo System x3650 M4 HD - Installing the 16 X1.8-Inch SSD Assembly Kit

Power
cable
Configuration
cable
Backplane
Power
cable
Configuration
cable
Backplane
Backplane
Configuration
cable
Power
cable
Mini-SAS cable
Mini-SAS cable
Mini-SAS cable
Figure82.Backplanescableconnection
Step11.Installtheharddiskdrives(see“Installingahot-swapdrive”onpage42).
Step12.Installthe2.5-inchHDDfillersintoemptydrives.
Ifyouhaveotherdevicestoinstallorremove,dosonow.Otherwise,goto“Completingtheinstallation”
onpage94.
Installingthe16x1.8-inchSSDassemblykit
Usethisinformationtoinstallthe16x1.8-inchSSDassemblykit.
Toorderthe16x1.8-inchSSDassemblykit,contactyourLenovosalesrepresentativeorLenovoreseller.
The16x1.8-inchSSDassemblykitcontainsthefollowingcomponents:
•Two1.8-inchsolid-state-drivebackplaneassemblies
•Onepowercable
•Oneconfigurationcable
•Fourmini-SAScables(820mm)
Toinstallthe16x1.8-inchSSDassemblykitintheserver,completethefollowingsteps.
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”
onpage34
.
Step2.Turnofftheserverandperipheraldevicesanddisconnectthepowercordsandallexternalcables,
ifnecessary.
Step3.Removethecover(see“Removingthecover”onpage37).
Step4.Removethetwo4-drivefillerpanelsfromtherightside.
Chapter2.Installingoptionaldevices91