USB embedded
hypervisor
flash device
Lockbar
Figure186.USBhypervisorflashdeviceremoval
a.UnlocktheretentionlatchontheUSBconnectorbypushingdownonthebluelockbar.
b.Grasptheflashdeviceandpulltoremoveitfromtheconnector.
Ifyouareinstructedtoreturntheflashdevice,followallpackaginginstructions,anduseanypackaging
materialsforshippingthataresuppliedtoyou.
ReplacingaUSBembeddedhypervisorflashdevice
UsethisinformationtoreplaceaUSBembeddedhypervisorflashdevice.
ToinstallaUSBhypervisorflashdevice,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”
onpage34.
Step2.Turnofftheserverandperipheraldevicesanddisconnectthepowercords.
Step3.Removethecover(see“Removingthecover”onpage195).
Step4.RemovePCIriser-cardassembly2(see“RemovingaPCIriser-cardassembly”onpage221).
Step5.Installtheflashdevice:
Chapter6.Removingandreplacingcomponents265