Lenovo System x3650 M4 HD - Removing the Operator Information Panel Assembly

Cable clip
Figure201.SAS,powerandoperatorinformationpanelcableinsertion
Step6.Installthebezel(see“Replacingthebezel”onpage198).
Step7.Installthecover(see“Replacingthecover”onpage196).
Step8.InsertthevideoandUSBbreakoutcable(see“ReplacingthefrontvideoandUSBbreakout
cable”onpage272).
Step9.Slidetheserverintotherack.
Step10.Reconnectthepowercordsandanycablesthatyouremoved.
Step11.Turnontheperipheraldevicesandtheserver.
Removingtheoperatorinformationpanelassembly
Usethisinformationtoremovetheoperatorinformationpanelassembly.
Toremovetheoperatorinformationpanel,completethefollowingsteps.
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”
onpage34
.
Step2.Turnofftheserverandperipheraldevicesanddisconnectthepowercordsandallexternalcables,
ifnecessary.
Step3.Removethecover(see“Removingthecover”onpage195).
Step4.Disconnectthecablefromthebackoftheoperatorinformationpanelassembly.
278LenovoSystemx3650M4HDInstallationandServiceGuide