Lenovo System x3650 M4 HD - Completing the Installation; Replacing the Air Baffle

Backplane
connection
cable
Power
cable
Configuration
cable
Backplane
Power
cable
Configuration
cable
Expander
Mini-SAS cable
Power
cable
Power
cable
Mini-SAS cable
Mini-SAS cable
1.8-inch backplane assembly
1.8-inch backplane assembly
Configuration
cable
Configuration
cable
Figure86.Backplanescableconnection
Step7.Inserttheharddiskdrivesandthefillerpanelsintothebays.
Step8.Installthecover(see“Replacingthecover”onpage196).
Ifyouhaveotherdevicestoinstallorremove,dosonow.Otherwise,goto“Completingtheinstallation”
onpage94.
Completingtheinstallation
Usethisinformationtocompletetheinstallation.
Tocompletetheinstallation,completethefollowingsteps:
Step1.Ifyouremovedtheairbaffle,reinstallit(see“Replacingtheairbaffle”onpage94).
Step2.Ifyouremovedtheservercover,replaceit(see“Replacingthecover”onpage96).
Step3.Installtheserverintherackcabinet(seetheRackInstallationInstructionsthatcomewiththe
serverforinstructions).
Step4.Reconnectthecablesandpowercords(see“Connectingtheexternalcables”onpage97).
Step5.Updatetheserverconfiguration(see“Updatingtheserverconfiguration”onpage98).
Step6.Slidetheserverbackintotherack,ifnecessary.
Step7.Starttheserver.Confirmthatitstartscorrectlyandrecognizesthenewlyinstalleddevices,and
makesurethatnoerrorLEDsarelit.
Step8.(BusinessPartnersonly)Completetheadditionalstepsin“InstructionsforBusinessPartners”
onpage25.
Replacingtheairbaffle
Usethisinformationtoreplacetheairbaffle.
94LenovoSystemx3650M4HDInstallationandServiceGuide