Lenovo System x3650 M4 HD - Replacing the Bezel

Hex screw driver
Figure119.Bezelremoval
Step4.Rotatethetopofthebezelawayfromtheserver.
Step5.Removetheoperatorinformationpanelassembly(see“Removingtheoperatorinformationpanel
assembly”onpage278
).
Ifyouareinstructedtoreturnthebezel,followallpackaginginstructions,anduseanypackagingmaterials
forshippingthataresuppliedtoyou.
Replacingthebezel
Usethisinformationtoreplacethebezel.
Toinstallthebezel,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”
onpage34
.
Step2.Turnofftheserverandperipheraldevicesanddisconnectthepowercordsandallexternalcables,
ifnecessary.
Step3.Reinstalltheoperatorinformationpanelassemblyinthebezel,ifithasbeenremovedearlier(see
“Replacingtheoperatorinformationpanelassembly”onpage279).
Step4.Insertthetabsonthebottomofthebezelintotheslotsontheundersideofthechassisandattach
itwiththescrews.
Note:Usethehexscrewdrivertoinstallthescrews.
198LenovoSystemx3650M4HDInstallationandServiceGuide