Lenovo System x3650 M4 HD - Installing a Hot-Swap Drive

ThefollowingillustrationshowsthelocationoftheIDsoftheharddiskdrives.TheIDnumbersandthe
drivebaynumbersarethesame.
00000
00000
00000
00000
00000
00000
00000
00000
Bay 0 Bay 15 Bay 16 Bay 31
1.8-inch solid state
drive bays 16 - 31
2.5-inch hard disk
drive bays 0-15
Figure28.Frontview:2.5-inchand1.8-inchhot-swapdriveIDs
Installingahot-swapdrive
Usethisinformationtoinstallahot-swapdrive.
Toinstallahot-swapdrive,completethefollowingsteps:
Note:Ifyouhaveonlyoneharddiskdrive,youmustinstallitinthebay0.
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”
onpage34.
Step2.Removethefillerpanelfromtheemptydrivebay.Keepthefillerpanelinasafeplace.
Step3.Touchthestatic-protectivepackagethatcontainsthedrivetoanyunpaintedmetalsurfaceonthe
server;then,removethedrivefromthepackageandplaceitonastatic-protectivesurface.
Step4.Installa2.5-inchhot-swapdrive:
a.Makesurethatthetrayhandleisintheopen(unlocked)position.
b.Alignthedrivewiththeguiderailsinthebay.
Handle
Filler panel handle
Latch
Figure29.2.5-inchhot-swapharddiskdrivesinstallation
c.Gentlypushthedriveintothebayuntilthedrivestops.
d.Rotatethetrayhandletotheclosed(locked)position.
Step5.Installa1.8-inchhot-swapdrive:
a.Insertthedriveintothedrivebaywiththelabelsideofthedrivefacingtherightsideofthe
server.
42LenovoSystemx3650M4HDInstallationandServiceGuide