ThinkServerRAID700Adapter
ThefollowingillustrationshowstheconnectorsontheThinkServerRAID700Adapter.
Figure18.ThinkServerRAID700Adapter
1Ports7-43Externalconnector
2Ports3-04Board-to-boardconnector
1Ports7-4
Usedtoconnectamini-SASsignalcable.See“Connectingthecables”onpage39.
2Ports3-0
Usedtoconnectamini-SASsignalcable.See“Connectingthecables”onpage39.
3Externalconnector
Usedtoconnecta2-pin200mm(7.87inches)RAIDcardtothesystemboardhard-disk-driveLEDcable.
See“Connectingthecables”onpage39.
4Board-to-boardconnector
UsedtoconnectaThinkServerRAID700Battery.See“FortheThinkServerRAID700Adapter:Installingor
removingtheThinkServerRAID700Battery”onpage108.
Hot-swaphard-disk-drivebackplane
Yourservercomeswithoneofthefollowinghot-swapharddiskdriveandbackplanecongurations:
•Fivetoeight3.5-inchhot-swapSATAorSASharddiskdriveswithtwobackplanes
•Uptofour3.5-inchhot-swapSATAorSASharddiskdriveswithonebackplane
•Uptoeight2.5-inchhot-swapSASharddiskdriveswithonebackplane
Chapter3.Productoverview35