Page 198
MegaRAID SAS Software User GuideChapter 5: MegaRAID Command Tool
| Virtual Drive-Related Options
5.13.8 Delete Specified Virtual
Drive(s)
Use the command in the following table to delete one, multiple, or all virtual drives on
the selected controller(s).
5.13.9 Display the Free Space Use the command in the following table to display the free space that is available to use
for configuration on the selected controller(s).
5.14 Virtual Drive-Related
Options
You can use the commands in this section to select settings for the virtual drives and
perform actions on them.
5.14.1 Display Virtual Drive
Information
Use the command in the following table to display virtual drive information for the
selected controller(s).
Table 70: Delete Specified Virtual Drives
Convention MegaCli –CfgLDDel –Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
Description Deletes the specified virtual drive(s) on the selected controller(s). You can
delete one virtual drive, multiple virtual drives, or all of the selected virtual
drives on selected controller(s).
Table 71: Display Free Space
Convention MegaCli –CfgFreeSpaceInfo -aN|-a0,1,2|-aALL
Description Displays all of the free space available for configuration on the selected
controller(s). The information displayed includes the number of drive
groups, the number of spans in each drive group, the number of free space
slots in each drive group, the start block, and the size (in both blocks and
megabytes) of each free space slot.
Table 72: Display Virtual Drive Information
Convention MegaCli –LDInfo –Lx|-L0,1,2|-Lall -aN|-a0,1,2|-aALL
Description Displays information about the virtual drive(s) on the selected controller(s).
This information includes the name, RAID level, RAID level qualifier, capacity
in megabytes, state, stripe size, number of drives, span depth, cache policy,
access policy, and ongoing activity progress, if any, including initialization,
background initialization, consistency check, and reconstruction.
To Next Page
Loading...
Need help?
General