Lenovo ThinkServer TS430 User Manual

Page 181
MegaRAID SAS Software User Guide Chapter 5: MegaRAID Command Tool
| SafeStore Security Options
5.7.6 Change the Security Key Use the command in the following table to change they security key to a new security
key.
5.7.7 Get the Security Key ID Use the command in the following table to display the security key ID.
5.7.8 Set the Security Key ID Use the command in the following table to set the security key ID.
Table 33: Change the Security Key
Convention MegaCli -ChangeSecurityKey -OldSecurityKey
sssssssssss | -SecurityKey sssssssssss| [-Passphrase
sssssssssss] | [-KeyID kkkkkkkkkkk] -aN
Description Changes a security key to a new security key.
-ChangeSecurityKey: Changes the security key.
-OldSecurityKey sssssssssss: Enters the old security key. The
security key is case-sensitive. It must be between eight and thirty-two
characters and contain at least one number, one lowercase letter, one
uppercase letter, and one non-alphanumeric character (e.g. < > @ +).
The space character is not permitted.
-SecurityKey sssssssssss: Enters the new security key. The security
key is case-sensitive. It must be between eight and thirty-two characters and
contain at least one number, one lowercase letter, one uppercase letter, and
one non-alphanumeric character (e.g. < > @ +). The space character is not
permitted.
[-Passphrase sssssssssss]: Enters the new passphrase. The pass
phrase is case-sensitive. It must be between eight and thirty-two characters
and contain at least one number, one lowercase letter, one uppercase letter,
and one non-alphanumeric character (e.g. < > @ +). The space character is
not permitted.
[-KeyID kkkkkkkkkkk]: Enters the security key ID. The key ID displays
when you have to enter a security key. If you have multiple security keys, the
security key ID helps you determine which security key to enter.
Table 34: Get the Security Key ID
Convention MegaCli -GetKeyID [-PhysDrv[E0:S0]] -aN
Description -GetKeyID: Displays the security key ID.
Table 35: Set the Security Key ID
Convention MegaCli -SetKeyID -KeyID kkkkkkkkkkk -aN
Description -SetKeyID: Set the security key ID.
-KeyID kkkkkkkkkkk: Enters the security key ID. The key ID displays
when you have to enter a security key. If you have multiple security
keys, the security key ID helps you determine which security key to
enter.

Lenovo ThinkServer TS430 Specifications

General

Brand	Lenovo
Model	ThinkServer TS430
Category	Server
Language	English