EasyManuals Logo

Lenovo ThinkSystem DM5000 series User Manual

Lenovo ThinkSystem DM5000 series
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #125 background imageLoading...
Page #125 background image
serviceproc is the Service Processor.
storage is an ATA, FC-AL, or SAS interface that has an attached disk shelf.
toe is a TCP Offload Engine, a type of NIC.
mb specifies that all the motherboard devices are to be tested.
slot slotnum specifies that a device in a specific slot number is to be tested.
-name device specifies a given device class and type.
Step 4. View the status of the test by entering the following command: sldiag device status
Your storage system provides the following output while the tests are still running:
There are still test(s) being processed.
After all the tests are complete, the following response appears by default:
*> <SLDIAG:_ALL_TESTS_COMPLETED>
Step 5. Verify that no hardware problems resulted from the addition or replacement of hardware
components on your storage system by entering the following command: sldiag device status
[-dev devtype|mb|slotslotnum] [-name device] -long -state failed
Example
The following example pulls up the full status of failures resulting from testing a newly installed FC-
AL adapter:
*> sldiag device status -dev fcal -long -state failed
TEST START ------------------------------------------
DEVTYPE: fcal
NAME: Fcal Loopback Test
START DATE: Sat Jan 3 23:10:56 GMT 2009
STATUS: Completed
Starting test on Fcal Adapter: 0b
Started gathering adapter info.
Adapter get adapter info OK
Adapter fc_data_link_rate: 1Gib
Adapter name: QLogic 2532
Adapter firmware rev: 4.5.2
Adapter hardware rev: 2
Started adapter get WWN string test.
Adapter get WWN string OK wwn_str: 5:00a:098300:035309
Started adapter interrupt test
Adapter interrupt test OK
Started adapter reset test.
Adapter reset OK
Started Adapter Get Connection State Test.
Connection State: 5
Loop on FC Adapter 0b is OPEN
Started adapter Retry LIP test
Adapter Retry LIP OK
ERROR: failed to init adaptor port for IOCTL call
ioctl_status.class_type = 0x1
ioctl_status.subclass = 0x3
ioctl_status.info = 0x0
Started INTERNAL LOOPBACK:
Chapter 7
. System level diagnostics 119

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lenovo ThinkSystem DM5000 series and is the answer not in the manual?

Lenovo ThinkSystem DM5000 series Specifications

General IconGeneral
BrandLenovo
ModelThinkSystem DM5000 series
CategoryStorage
LanguageEnglish

Related product manuals