Where to find the external LCD diagnostics handset
Location Callout
The external LCD diagnostics handset is connected to the
server with an external cable.
1 The LCD diagnostics handset that can be connected to
the server with an external cable.
2 The magnetic bottom with which the device can be
attached to the top or side of the rack. This is helpful and
can free up both hands for certain service tasks.
3 The external diagnostics connector on the front of the
server that can be used to connect an external LCD
diagnostics handset.
Note: Pay attention to the following steps when unplugging the external handset:
Step 1. Press the plastic clip on the plug in the shown direction.
Step 2. Gently pull out the cable from the connector while keeping the clip pressed down.
28
ThinkSystem SR645 Maintenance Manual
To Next Page
Loading...
