10 x 2.5-inch front drive bays (6SAS/SATA + 4AnyBay)
The server model is configured with one 10 x 2.5-inch AnyBay front drive backplane. Below lists all
supported configurations with this front drive backplane.
Note: The AnyBay backplane is used as “6 SAS/SATA + 4 AnyBay” backplane.
Configuration
option
Rear BP
Storage controller
Qty.
Type
Qty. Type
Config. 1
Config. 2
1 SFF 16i RAID/HBA
Config. 3
1 CFF 16i RAID/HBA
Config. 4
1 2 x 2.5" SAS/SATA
Config. 5
1 2 x 2.5" SAS/SATA 1 CFF 16i RAID/HBA
Depending on your server configurations, refer to one of the following sections for cable routing information.
•
Configuration 1, 2, and 3: front drive bays only
• Configuration 4 and 5: front drive bays and rear drive bays
86
ThinkSystem SR645 Maintenance Manual