FIO cable routing
Use the section to understand the cable routing for FIO.
Cable routing for FIO
Note: The illustration shows the cabling scenario for server models with four 3.5-inch front drive bays.
Location of each connector on the front of the server varies by models. For detailed location of front I/O
components for different models, see Front view.
Figure 12. Cable routing for FIO
From To
1 VGA cable VGA connector on the system board
2 LCD external diagnostics handset cable LCD EXT connector on the system board
3 USB cable Front USB connector on the system board
4 Front diagnostic panel cable FIO connector on the system board
Chapter 3. Internal cable routing 59
To Next Page
Loading...
