Lenovo ThinkSystem SR665 - Page 308

Procedure
Step 1. Touch the static-protective package that contains the new RAID super capacitor module to any
unpainted surface on the outside of the server. Then, take the new RAID super capacitor module
out of the package and place it on a static-protective surface.
Step 2. Open the drive cage handle.
Figure 135. Opening the handle of the middle drive cage
1. Pull out the blue plunger.
2. Slide the metal cover out of the drive cage.
Step 3. Remove the metal cover.
Figure 136. Removing the metal cover
1. Pull out the blue plunger.
2. Slide the metal cover out of the drive cage.
298
ThinkSystem SR665 Maintenance Manual