Configuration
7-274
SHB9300CRV EN 2.0
List of selection menus
9371BB keypad Global Drive Control or LEMOC2
Main menu Submenu Main menu Submenu
USER menu USER menu
Code list Code list
Load / Store Parameter-set management
Diagnostics Diagnostics
Actual info Actual operation
History History
Short set-up Short set-up
Speed mode Speed operation
Torque mode Torque operation
DF master Digital frequency - master
DF slave bus Digital frequency - slave line
DF slave cas Digital frequency - slave cascade
User menu CFG Configuration user menu
Main FB Main function blocks
NSET NSET: Speed preprocessing
NSET-JOG NSET-JOG: JOGvalues
NSET-RAMP1 NSET-RAMP1: Standard RFG
MCTRL MCTRL: Motor control
DFSET DFSET: Dig. frequency processing
DCTRL DCTRL: Device control
Te rmina l I/O Te rmina l I/O
AIN1 X6.1/2 Analog input 1 X6.1/2
AIN2 X6.3/4 Analog input 2 X6.3/4
AOUT1X662 Analog output 1 X6/62
AOUT2X663 Analog output 2 X6/63
DIGIN Digital inputs
DIGOUT Digital outputs
DFIN Digital frequency input
DFOUT Digital frequency output
State bus State bus
Controller Controller setting
Speed Speed
Current Current/torque
Phase Phase
Motor/feedb. Motor/feedback system
Motor adj Motor adjustment
Feedback Feedback systems
Monitoring Monitorings
To Next Page
Loading...
