Lenze 9325 - Page 56

Installation
4-16

SHB9300CRV EN 2.0
Types 9330 and 9331
T1
T2
PE
UV
W
M5 X 12


l Strain relief by using cable binders .
l Correct screen connection with screened cables:
– Apply motor cable screen to the screening plate using
clamp and screws M5x12
ó.
– Connect thermal contact screen at the stud PE next to the
motor connections over a large surface.
Type 9332
T1
T2
PE

U
V
W
M5 X 12
M4 X 12


l Strain relief by using cable clamps and screws M4x12 ì.
– Additional strain relief/fixing can be achieved by using
cable binders
.
l Correct screen connection with screened cables:
– Apply motor cable screen to the screening plate using
clamp and screws M5x12
ó.
– Connect thermal contact screen at the stud PE next to the
motor connections over a large surface.
Fig. 4-8 Proposal for motor connection
Show/Hide Bookmarks