Lenze i510 Series

Parameter Name / value range / [default seng] Info
0x2602:001
(P708.01)
Keypad setup: CTRL & F/R key setup
(Keypad setup: CTRL&F/R keys)
•
From version 03.00
Disable/enable CTRL and F/R key of the keypad.
0 CTRL & F/R Disable
1 CTRL & F/R Enable
2 CTRL Enable F/R Disable
3 CTRL Disable F/R Enable
0x2602:002
(P708.02)
Keypad setup: Select rotaonal direcon
(Keypad setup: Select rot.dir.)
•
From version 03.00
Instructed direcon of rotaon if local keypad control is acve.
•
If the local keypad control is acve, this seng can be directly
changed via the keypad key
R
F
if the key in 0x2602:001 (P708.01)
has not been disabled.
•
When the remote control is changed over to local keypad control and
vice versa, this parameter is set to "Forward [0]".
0 Forward
1 Reverse
0x2602:003
(P708.03)
Keypad setup: Keypad Full Control
(Keypad setup: Keypad Full Ctrl)
•
From version 03.00
Acvate/deacvate full keypad control.
•
This seng can be changed directly via the keypad key
CTRL
if the
key in 0x2602:001 (P708.01) has not been disabled.
•
When the control mode is changed over, the motor is stopped and the
"Forward" direcon of rotaon is set.
0 O
1 On
Addional funcons
Keypad
Keypad - Conguraon of R/F and CTRL buons
256