Lenze i510 Series

25218 0x6282 User-dened fault 2 Keypad display: User fault 2
Cause Error type/response Remedy
Flexible I/O conguraon: the "Acvate fault 2"
funcon was acvated via the trigger selected
in 0x2631:044 (P400.44).
Fault Eliminate error cause and then reset error.
Related topics
4Triggering a user-dened fault ^ 392
25232 0x6290 Reversal warning Keypad display: Invert rotaon
Cause Error type/response Remedy
•
Negave setpoint selecon with an acve
limitaon of rotaon 0x283A (P304.00).
•
The "Reverse rotaonal direcon"
0x2631:013 (P400.13) funcon was reques-
ted with an acve limitaon of rotaon
0x283A (P304.00).
Warning
•
The motor is brought to a standsll, since a
reversal of the rotang direcon is not per-
missible.
•
Check setpoint selecon and trigger.
•
Check seng in 0x283A (P304.00).
Related topics
4Motor rotang direcon ^ 159
25233 0x6291 Number of maximum permissible faults exceeded Keypad display: Trouble overow
Cause Error type/response Remedy
The number of permied restart aempts aer
a fault set in 0x2839:003 (P760.03) was excee-
ded. The fault occurred to frequently and could
not be reset.
Fault
•
The motor remains at a standsll, no auto-
mac restart is executed.
Check and the eliminate the fault.
Related topics
4Automac restart ^ 312
25248 0x62A0 AC Drive: user fault Keypad display: AC Dr. UserFault
Cause Error type/response Remedy
The "Acvate fault" funcon was triggered via
bit 10 of the LECOM control word 0x400B:002
(P592.02).
Fault Eliminate error cause and then reset error.
25249 0x62A1 Network: user fault 1 Keypad display: Netw.UserFault 1
Cause Error type/response Remedy
The "Acvate fault 1" funcon was triggered via
the NetWordIN1 data word 0x4008:001
(P590.01).
Fault Eliminate error cause and then reset error.
Related topics
4Further process data ^ 196
25250 0x62A2 Network: user fault 2 Keypad display: Netw.UserFault 2
Cause Error type/response Remedy
The "Acvate fault 2" funcon was triggered via
the NetWordIN1 data word 0x4008:001
(P590.01).
Fault Eliminate error cause and then reset error.
Related topics
4Further process data ^ 196
Appendix
Error codes
444