NAS Port Type: Indicates the type of physical port the network access server is using to
authenticate the user. System will send this value to the external RADIUS server, if the
external RADIUS server needs this.
Class-Policy Mapping: This function is to assign a Policy to a RADIUS class attribute sent
from the RADIUS server. When the clients classified by RADIUS class attributes logs into the
system via the RADIUS server, each client will be mapped to an assigned Policy.
Primary / Secondary RADIUS Server
Server: Enter the domain name or IP address of your RADIUS Server.
Authentication Port: Enter the Port number used for authentication.
Accounting Port: Enter the Port number used for accounting.
Secret Key: Secret Key used for authentication.
Accounting Service: Enable / Disable RADIUS accounting.
Authentication Protocol: Select Challenge-Handshake Authentication Protocol (CHAP) or
Password Authentication Protocol (PAP).
To Next Page
Loading...
