The description of the above-mentioned table is as follows:
The present firmware version of WHG-1000
The system name. The default is WHG-1000
The page the users are directed to after initial login success.
SYSLOG server- System Log
The IP address and port number of the external SYSLOG Server.
N/A means that it is not configured.
SYSLOG server- On-demand
Users Log
The IP address and port number of the external SYSLOG Server.
N/A means that it is not configured.
Warning of Internet
Disconnection
Show the status for the connection at WAN is normal or abnormal
(Internet Connection Detection) and all online users are
allowed/disallowed to log in the network.
The maximum number of days for the system to retain the users‟
information.
Receiver
Email
Address (es)
The email address to which the user log information will be set.
The network time server that the system is set to align.
The system time is shown as the local time.
The minutes allowed for the users to be inactive before their account
expires automatically.
Enabled/disabled stands for the current setting to allow/disallow
multiple login from the same local account.
IP address of the preferred DNS Server.
IP address of the alternate DNS Server.