Diagnostics information 2-21
4513-220, -230
Insufficient collation area
Defective Flash
Network interface errors
z
zz
Meaning
The printer memory does not have the free space necessary to collate the print job. This may happen due to one of these
errors:
• Memory is full.
• A page is too complex to print.
• A page is shorter than the set page margins.
• Memory is insufficient to save what is in the buffer.
Action
•Press Continue to clear the message and continue printing the job. (The job may not print correctly.)
• Press and release Cancel to cancel the print job.
• Press and hold Cancel to reset the printer.
To avoid this error in the future:
• Simplify the print job. Reduce the complexity of the page by reducing the amount of text or graphics on the page
and deleting unnecessary downloaded fonts or macros.
• Install additional printer memory.
zz z
Meaning
The printer detects a defective flash.
Action
Press Continue briefly and the normal operation will continue. The flash will be marked as bad and cannot be used
until the problem is resolved.
z
z z
Meaning
The printer cannot establish communication with the network.
Action
Press Continue to clear the message and continue printing. (The previous print job may not print correctly.)