3-4 Lexmark™ E260d, E260dn
4513-220, -230
Configuration menu selections
To enter the Configuration menu:
1. Turn off the printer.
2. Open the front access door.
3. Turn on the printer while pressing and holding Continue .
4. Close the front access door once the Error light displays.
Print menus by pressing and holding until all of the lights flash.
Utilities
Use the Utilities menu to troubleshoot printer problems.
Setting Use setting to Values
Reset Factory Defaults Return the printer settings to factory default values.
Sometimes resetting the printer to the original settings solves formatting problems.
All menu items are reset to the factory default values except:
• All settings in the Parallel menu, Network menu, and USB menu.
• All downloaded resources (fonts, macros, and symbol sets) in printer memory (RAM)
are deleted.
Resources in flash memory are unaffected.
Hex Trace Help isolate printing problems when
unexpected characters print or
characters are missing.
Hex Trace helps determine if there is a
problem with the language interpreter
or the cable by providing information
about what the printer is receiving.
To exit Hex Trace, turn off the printer.
Off (default)
On
Print Quality Test Pages Help isolate print quality problems, such as streaking. Four pages print to help evaluate
print quality:
• A text page with printer information, cartridge information, current margin settings,
and a graphic.
• One page is gray with graphics, one is black, and one is blank.
Reset Photoconductor
Maintenance Counter
Return the photoconductor counter to zero.
The replace photoconductor message should be cleared only when the photoconductor
kit has been replaced.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
