2-2 Service Manual
4512-630
Overview of the operator panel and menus
The operator panel on your printer is a 4-line, back-lit, grayscale display that can show both graphics and text.
The Back, Menu, and Stop buttons are located to the left of the display, the navigation buttons are located
below the display, and the numeric pad is located to the right of the display.
The use of the buttons and the layout of the display panel are described in the following table.
Operator panel
Button Function
Back
Press the Back button to return to the last screen you viewed.
Note: Changes made on the screen will not be applied if you press the Back
button.
Menu
Press the Menu button to open the menu index.
Note: The printer must be in the Ready state to access the menu index. A
message indicating the menus are unavailable will appear if the printer is not
ready.
Stop
Press Stop to stop the mechanical operation of the printer. After pressing Stop,
the message Stopping is displayed. When the printer has stopped, the status
line in the operator panel will show Stopped, and a list of options will appear.
Indicator light
Navigation buttons
LCD
Select
Back
Menu
Stop
To Next Page
Loading...
Need help?
General