3-26 Service Manual
4512-630
Configuration menu (CONFIG MENU)
Entering Configuration Menu
1. Turn off the printer.
2. Press and hold and .
3. Turn on the printer.
4. Release the buttons when Performing Self Test displays.
The message CONFIG MENU displays on the top line of the operator panel.
Available menus
Some menus are not available, depending on the configuration of the printer.
Maint Cnt Value See “Maintenance page count (Maint Cnt Value)” on page 3-27
Reset Maint Cnt See “Maintenance page counter reset (Reset Maint Cnt)” on
page 3-27
Reset PC Cnt
Prt Quality Pgs See “Print quality pages (Prt Quality Pgs)” on page 3-27
Panel Menus See “Panel Menus” on page 3-27
PPDS Emulation See “” on page 3-27
Demo Mode See “Demo Mode” on page 3-28
Factory Defaults See “Factory Defaults” on page 3-28
Energy Conserve See “Energy Conserve” on page 3-28
EVENT LOG (print log only) See “EVENT LOG” on page 3-28
Paper Prompts See “Paper Prompts” on page 3-28
Env Prompts See “Env Prompts” on page 3-28
Change Prompts See “Change Prompts” on page 3-29
Reduce Curl See “Reduced Curl” on page 3-29
USB Speed See “USB Speed” on page 3-29
Exit Config Menu See “Exit Config Menu” on page 3-29
To Next Page
Loading...
Need help?
General