‑ On
‑ On
‑ On
‑ On
If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or
more of the following:
• From the printer control panel, press to continue printing. A data loss will occur.
• From the printer control panel, press to cancel the print job.
• Install additional printer memory.
• Decrease the resolution setting.
Miscellaneous messages
Close front door
‑ On
If the printer control light sequence matches the light sequence in the preceding illustration, then close the
front door of the printer.
Troubleshooting 139
To Next Page
Loading...
