Action Yes No
Step 6
Replace the imaging unit, and then resend the print job.
Is the print still too dark?
Contact
customer
support.
The problem is
solved.
Print is too light
ABC
DEF
Action Yes No
Step 1
a From the Quality menu, increase the toner darkness. To access
the Quality menu, do either of the following:
• If the printer is on a network, then open a Web browser and
type the printer IP address in the address field. Then
navigate to Settings > Printer Settings > Quality Menu.
Note: If you do not know the IP address of the printer,
then print a network setup page and locate the IP address
in the TCP/IP section.
• If the printer is connected to a computer by a USB or parallel
cable, then open the Local Printer Settings Utility for
Windows or Printer Settings for Macintosh.
Note: 8 is the factory default setting.
b Resend the print job.
Is the print still too light?
Go to step 2. The problem is
solved.
Troubleshooting 169
To Next Page
Loading...
